SCX-10-10

The Crown convection steamers feature a tilting kettle mounted on a modular steam coil boiler base. Constructed from satin finish type 304 stainless steel, the cooking chamber is made of one-piece, all-welded type 316 stainless steel. The doors have a removable stainless steel inner liner, a full perimeter gasket seal, a one-piece all-welded stainless steel outer liner, and a positive lock and seal mechanism with spring release. A stainless steel drip trough connected to a drain collects condensate when the door is opened. Removable stainless steel pan supports are also provided.

The control housing of each compartment is made of stainless steel with a fully removable side access panel. Each compartment is independently controlled with an illuminated on/off power switch, pilot ready light, pilot cooking light, and a 60-minute electric timer with an audible signal at the end of the cooking cycle. Steam flow is automatically cut off when the door is opened and reactivated when the door is closed.

The cabinet base with steam coil boiler and controls is supported by a full perimeter painted angle frame, reinforced counter, and boiler mountings. It features hinged door(s) with a magnetic latch and 6” (152 mm) stainless steel legs with 4 adjustable flanged feet for securing to the floor.

The boiler controls include automatic water level control, pressure gauge, water gauge glass, operating pressure control, safety high-limit pressure control, and a safety relief valve. The unit comes standard with a water treatment system, split water line, CSD-1 boiler controls, and automatic blowdown. It is ASME code stamped, National Board registered, c-CSA-us, and NSF certified.