OB-4-2-54-E

4 Tilting Oyster Cooker, 54” Electric Boiler Base —24KW, 240V, 3PH

This line of Crown Oyster cookers is constructed of type 316 stainless steel inner and outer shell with a #4 finish, one piece welded construction. Each 2 quart cooker is equipped with a tilt handle and heat resistant knob, allowing the cooker to be tilted forward 90° for complete emptying. The stainless steel mounting legs shall have the steam supply and condensate within the legs and the right leg fitted with the steam control valve for the oyster cooker. Oyster cookers are standard with a stainless steel lift off cover.
The oyster cookers are mounted on a cabinet base with full perimeter angle frame, reinforced counter, spillage sink complete with drain and drain screen, boiler mountings, electric boiler with controls, hinged doors with magnetic catches, removable side panels with 6” (152 mm) stainless steel legs with 4 adjustable flanged feet for securing to the floor. All #4 finish stainless steel exterior. Steam manifold concealed within cabinet fitted with steam trap and safety relief valve. Unit is standard with automatic boiler blowdown, CSD-1 boiler controls, and split water line.

-

Features

  • Water Treatment System
  • Automatic water level control.
  • Pressure gauge.
  • Pressure control with secondary safety pressure control.
  • Safety relief valve.
  • 316 Stainless steel inner and outer shell on TOC Kettles
  • Steam control valve in right leg
  • Split water line

Options

  • Stainless steel frame. (SSF-)
  • Stainless steel cabinet back. (SSB-)
  • 380 VAC, 3 Phase, 50/60 Hz
  • 415 VAC, 3 Phase, 50/60 Hz
  • 480 VAC, 3 Phase, 50/60 Hz
  • 575 or 600 VAC, 3 Phase, 60 Hz (EBVS-3)
  • Correctional Options Available
  • Steam take-off kit (STOK)
  • Nickel plated boiler shell (NPBS) - no charge
  • Water in “Y” strainer (Condenser Feed)
  • Dual pantry deck mount faucet with swing spout (DMF-12R-DJ)
  • Nylon cutting board. (NCB-)

OB-4-2-54-E

-

Request a Quote