Gas Convection Steamer, 2 Compartments, 6 Pan, (2) 6 gal Kettles, 60″ Cabinet, 115V, 250,000 BTU
This line of Crown convection steamers come complete with two tilting kettles on a modular gas fired steam boiler base, with stainless steel type 304 exterior and #4 finish, deck mounted faucet valve, swing nozzle and integral sink with common drain.
The convection steamer features doors with a removable inner liner of stainless steel, full perimeter gasket seal, outer shell of one piece, all welded stainless steel, positive lock and seal mechanism and a stainless steel drip trough connected to the drain in order to collect condensate when doors are opened. Each cooking chamber is constructed of all welded type 316 stainless steel, fully insulated and provided with removable stainless steel pan supports.
Steamer controls are accessible through a fully removable side panel. Each compartment includes a 60 minute mechanical timer with ready and cooking pilot light which will interrupt steam flow to the chamber when the compartment door is opened during cooking cycle and becomes reactivated when the door is closed. An audible signal will sound at the end of the cooking cycle.
The cabinet base with gas boiler and controls shall be provided with full perimeter painted angle frame, reinforced kettle and boiler mountings, hinged doors with magnetic latch and 6” (152 mm) stainless steel legs fitted with 4 adjustable flanged feet for securing unit to the floor. Boiler controls shall include automatic water level control, pressure gauge, water gauge glass, operating pressure control, safety high-limit pressure control, safety relief valve and cathodic protector. The boiler shall be ASME code stamped and National Board registered. Unit comes standard with a water treatment system, split water line, CSD-1 boiler controls, electronic ignition and automatic blowdown.
The boiler is ASME code stamped and National Board registered.
- Stainless steel construction for easy cleaning and rust prevention
- 316 stainless steel cooking chamber
- Coved corners
- Easy to operate controls
- Easy open, heavy-duty door with quick release handle
- CSD Code Package standard
- Water Treatment System
- Floor protective panel
- 300,000 BTU
- 220-240 VAC operation (specify voltage)(GBVS-1)
- Stainless steel rear panel (SSB-)
- Stainless steel frame (SSF-)
- Correctional package
- Load compensating timers (LCT-)
- Etched gallon markings (for kettles)(GM-)
- Etched liters markings (for kettles)(LM-)
- Spray and rinse assembly
- Steam take-off kit (STOK)
- Water in ‘Y’ strainer (condenser feed)
- Lift-off cover (C-)
- Stainless steel basket (SSB-)
- Pour lip strainer (TKS-)