ES-30

Electric Floor Tilt Skillet 30 Gallon — 220V, 3PH

The ES-30 and ES-40 feature a spring assisted stainless steel cover with full width handle, no-drip condensate guide, etched gallon markings, and vent port with swing cover. The pan has a sloped front and be front hinged for easy tilting pour control and comes complete with a removable pour strainer. Pan is formed from 10 gauge 304 stainless steel with a #4 finish exterior and polished interior with coved corners for easy cleaning. Heating is accomplished by electric elements cast embedded in a full 1-3/8″ (35 mm) thick aluminum casting bolted to the underside of the pan for even heat distribution across the entire surface.
The pan is mounted on a heavy duty welded frame with stainless steel exterior supported by an all welded 1-5/8″ (41 mm) stainless steel pipe frame with adjustable bullet feet and rear legs fitted with flange adjustable feet for securing to the floor. Unit has a permanently lubricated, self-contained gear box tilt mechanism to allow the pan to tilt forward for complete emptying of contents. The controls enclosure are designed to meet NEMA-2 and provide a degree of protection against dripping and light splashing and include a thermostat with OFF position and a range of 160°F – 445°F (71°C – 229°C), a thermostat indicator light, pan tilt switch that shuts elements off if tilted more than 5°, and high temperature cut-off set at 53 6°F (280°C).

-

Features

  • 304 Stainless Steel liner
  • Manual tilt
  • Pour strainer
  • 4” vent port
  • Etched gallon markings
  • Flanged feet

Options

  • 380 VAC, 3 phase, 50/60 Hz
  • 415 VAC, 3 phase, 50/60 Hz
  • 480 VAC, 3 phase, 50/60 Hz
  • 600 VAC, 3 phase, 50/60 Hz
  • Etched liter markings (LMS-30, LMS-40)
  • 2" draw off valve with strainer (TVT-2)
  • 3” draw off valve with strainer (TVT-3)
  • Correctional Options Available
  • Sliding drain pan (S-SDP-2)
  • Pan carrier (PC-3)
  • Steam pan insert (SPI-30, SPI-40)
  • 12” Single pantry faucet with swing spout (SF-12)
  • 12” Double pantry faucet with swing spout (DF-12)
  • 3” Stainless steel faucet plumbing enclosure (SPE-1)
  • Single pantry faucet & bracket with 60” pot filler (SP-KF)
  • Double pantry faucet & bracket with 60” pot filler (DP-KF)
  • Half size pan carrier for ES-30 when TVT ordered (PC-HP)
  • Faucet bracket (FB)
  • Front flanged feet (FFF-2)

ES-30

-

Request a Quote