Electric Steam Kettle, Stationary Pedestal, 2/3 Jacket, 80 Gallon — 220V, 1PH
This line of Crown kettles feature a double wall kettle interior which forms a steam jacket around the lower 2/3 of the kettle. The jacket enclosure contains distilled water which is factory sealed. The bottom of the kettle is of hemispherical design for superior heat circulation. Pedestal base has four 7/16 of an inch holes evenly spaced for securing unit to floor.
Unit is constructed of all welded #4 finish stainless steel, type 304. The interior liner is standard 316 for high acid content cooking. The controls are integrally mounted and include a power switch, thermostat, pilot light, low water light, vacuum/pressure gauge, safety relief valve and low water shut off. Faucet bracket standard.
The kettle is standard with removable elements. Convenience features include a 2” (50 mm) sanitary draw-off valve with perforated strainer and spring assist hinged stainless steel domed cover.
The kettle operates in a temperature range of 165°F to 285°F (74°C to 140°C) at a maximum pressure of 50 psi (345 kPa). Includes faucet bracket.
Features
- 316 Stainless Steel liner
- 2/3 Jacketed
- Spring assist cover
- 2” tangent draw-off
- TPS strainer
- Faucet bracket
- 10 year hemi warranty (see warranty statement for full details)
Options
- 3” (76 mm) draw-off valve (TVS-3) with perforated strainer (TPS-)
- 24 kw on 40, 60, 80 gallon
- 33 kw on 60, 80, 100 gallon
- 380 VAC, 3 Phase, 50/60 Hz
- 415 VAC, 3 Phase, 50/60 Hz
- 480 VAC, 3 Phase, 50/60 Hz
- 600 VAC, 3 Phase, 50/60 Hz
- Two piece hinged stainless steel cover (2PHC- 40 gallons and up)
- Etched gallon markings (GM-)
- Etched litre markings(LM-)
- Correctional Options Available
- Solid state thermostat (SST-E)
- One piece lift off cover (C-)
- Triple basket assembly (TBA-)
- Solid stainless steel disc for draw-off valve (TSS-)
- Graduated measuring strip (CMS-)
- Strainer hook (SH)
- Single pantry faucet with swing spout (SF-18)
- Perforated strainer for draw-off valve (TPS-)
- Double pantry faucet with swing spout (DF-18)
- Draw-off valve hose kit (DVHK-)
- Calibrated thermostat dial “F”
- Calibrated thermostat dial “C”
- Kettle heat shield (KHS-)