EP-20F

Electric Steam Kettle, Stationary Pedestal, Full Jacket, 20 Gallon — 208V, 3PH

This line of Crown kettles are self-generating, electric, full jacket, low height pedestal kettle. A double wall kettle interior shall form a steam jacket around the full kettle. The jacket enclosure shall contain distilled water which is factory sealed. The bottom of the kettle shall be of hemispherical design for superior heat circulation.
The pedestal base shall have four, 7/16” holes evenly spaced for securing unit to the floor.
Construction shall be all welded #4 finish stainless steel, type 304. The interior liner shall be standard with 316 stainless steel for high acid content cooking. The controls shall be integrally mounted and shall include a power switch, thermostat, pilot light, low water light, vacuum/pressure gauge, safety relief valve, and low water shut off. Faucet bracket standard.
The kettle shall be standard with removable elements. Convenience features shall include a 2” (50 mm) draw-off valve and a spring assist hinged stainless steel domed cover. The kettle shall be ASME Code stamped, National Board Registered, c-CSA-us and NSF certified.
The kettle shall operate in a temperature range of 165̊F to 285°F (74°C to 140°C) at a maximum pressure of 50 psi (345 kPa).

-

Features

  • 316 Stainless Steel liner
  • Full Jacketed
  • Spring assist cover
  • 2” tangent draw-off
  • TPS strainer
  • Faucet bracket
  • 10 year hemi warranty (see warranty statement for full details)

Options

  • 3" (76 mm) draw-off valve (TVS-3) with perforated strainer (TPS-)
  • 24 kw on 40, 60, 80 gallon
  • 33 kw on 60, 80, 100 gallon
  • 380 VAC, 3 Phase, 50/60 Hz.
  • 415 VAC, 3 Phase, 50/60 Hz.
  • 480 VAC, 3 Phase, 50/60 Hz.
  • 600 VAC, 3 Phase, 50/60 Hz.
  • Two piece hinged stainless steel cover (2PHC-)
  • Etched gallon markings (GM-)
  • Etched litre markings(LM-)
  • Correctional Options Available
  • Solid state thermostat (SST-E)
  • Single pantry faucet with swing spout (SF-12)
  • Double pantry faucet with swing spout (DF-12)
  • One piece lift off cover (C-)
  • Triple basket assembly (TBA-)
  • Solid stainless steel disc for draw-off valve (TSS-)
  • Graduated measuring strip (CMS-)
  • Strainer hook (SH)
  • Draw-off valve hose kit (DVHK-)
  • Calibrated thermostat dial “F”
  • Calibrated thermostat dial “C”
  • Single pantry kettle filler (SP-KF)
  • Double pantry kettle filler (DP-KF)
  • Kettle heat shield (KHS-)

EP-20F

-

Request a Quote