This line of Crown convection steamers come complete with (2) 6 gallon kettles or (1) 6 and (1)10 gallon kettle on a modular electric steam boiler base, with stainless steel type 304 exterior and #4 finish, deck mounted faucet valve, swing nozzle and integral sink with common drain.
The convection steamer has doors with a removable inner liner of stainless steel, full perimeter gasket seal, outer shell of one piece, all welded, stainless steel, positive lock and seal mechanism and a stainless steel drip trough connected to the drain in order to collect condensate when doors are opened. Each cooking chamber is constructed of all welded type 316 stainless steel, fully insulated and provided with removable stainless steel pan supports and dimensions:
- ECX-2: 13.875”W x 10.875”H x 19.875”D (352 mm x 276 mm x 504 mm)
- ECX-10: 13.875”W x 17.375”H x 19.875”D (352 mm x 441 mm x 504 mm)
Steamer controls are accessible through a fully removable side panel and each compartment includes a 60 minute mechanical timer with ready and cooking pilot light and will interrupt steam flow to the chamber when the compartment door is opened during cooking cycle and is reactivated when the door is closed. An audible signal will sound at the end of the cooking cycle.
The cabinet base with electric boiler and controls shall be provided with full perimeter painted angle frame, reinforced kettle and boiler mountings, hinged doors with magnetic latch and 6” (152 mm) stainless steel legs fitted with 4 adjustable flanged feet for securing unit to the floor. Boiler controls shall include automatic water level control, pressure gauge, water gauge glass, operating pressure control, safety high-limit pressure control, and safety relief valve. Unit comes standard with a water treatment system, split water line, CSD-1 boiler controls, nickel plating, and automatic blowdown. The boiler shall be ASME code stamped and National Board registered.
The boiler is ASME code stamped and National Board registered.