The EC-20T is a self-generating, electric, tilting kettle. A double wall kettle interior shall form a steam jacket around the lower 2/3 of the kettle. The jacket enclosure contains distilled water which is factory sealed. The bottom of the kettle has a hemispherical design for superior heat circulation.

The mounting base includes four stainless steel tubular legs fitted with a four hole adjustable foot for securing the unit to the floor and a stainless steel mechanism housing.

A removable operating handle with heat proof knob shall be mounted on the right.

Construction shall be of all welded satin finish stainless steel, type 304. The interior cooking surface shall be of type 316 stainless steel for added resistance to corrosion. The kettle is ASME constructed, National Board Registered, c-CSA-us and NSF certified.

The controls are water resistant, integrally mounted and include a power switch, solid state thermostat, pilot light, vacuum/pressure gauge, safety valve, low water light, and low water shut off. Faucet bracket standard.

The kettle operates in a temperature range of 165°F to 285°F (74°C to 140°C) at a maximum pressure of 50 psi (345 kPa). The kettle comes standard with removable elements

  • BUY NOW online with our Click & Brick dealers below
  • For equipment guidance click Find Local Dealer
  • For equipment demonstrations click Find Local Rep


  • Low water level cut-off and indicator
  • Pressure gauge
  • Temperature control
  • Safety relief valve
  • Type 316 stainless steel liner
  • 2/3 steam jacket
  • 50 PSI (345 kPa) high pressure operation for higher cooking temperature
  • Integrally mounted controls
  • Removable elements
  • “Clean lock” to hold kettle in cooking position or 105° for ease of cleaning


  • 220 VAC, 1 or 3 phase, 50/60 Hz
  • 380 VAC, 3 phase, 50/60 Hz
  • 415 VAC, 3 phase, 50/60 Hz
  • 480 VAC, 3 phase, 50/60 Hz
  • 600 VAC, 3 phase, 50/60 Hz
  • 2″ (50mm) draw-off valve (mounted on side), complete with TPS-2
  • Etched gallon markings (GM-20)
  • Etched liter markings (LM-76)
  • Correctional Package
  • 12” High floor stand complete with sliding drain drawer and stationary drain (SD-30-20E) – factory installed, refer to stand spec sheet.


  • One piece lift-off stainless steel cover (C-20)
  • Stainless steel wire basket (SSB-20)
  • Perforated strainer for draw-off valves (TPS-2)
  • Solid strainer for draw-off valves (TSS-2)
  • Pour lip strainer (TKS-20)
  • Strainer hook (SH)
  •  Graduated measuring strip (CMS-20)
  • Single pantry faucet with swing spout (SF-12)
  • Double pantry with swing spout (DF-12)





Scroll to Top
Live Chat