Electric Steam Kettle Tilt Tri-Leg, 30 Gallon, Full Jacket — 240V, 1PH
This line of Crown kettles are self-generating, electric tilting full jacket kettle, low height. A double wall kettle interior forms a steam jacket around the kettle. The jacket enclosure contains distilled water which is factory sealed. The bottom of the kettle shall be of hemispherical design for superior heat circulation.
The console is drip proof, stainless steel clad and shall be supported on all welded 1-5/8” (41 mm) diameter stainless steel pipe frame and the legs fitted with 4 hole adjustable feet for securing to the floor.
The kettle pivots on trunnion connected to the tilt mechanism and the out-bore bearing connected to the frame and permits the kettle to tilt forward a full 90̊ for complete emptying. The tilt mechanism is self locking for positive stop action.
Construction is all welded #4 finish stainless steel, type 304. The kettle liner comes standard with type 316 for high acid content cooking. The controls are integrally mounted and shall include a power switch, thermostat, pilot light, low water light, vacuum/pressure gauge, safety relief valve , and low water shut off.
The kettle comes standard with removable elements. The kettle operates in a temperature range of 165°F to 285°F (74°C to 140°C) at a maximum pressure of 50 psi (345 kPa).
Features
- 316 Stainless Steel liner
- Full Jacketed
- Faucet bracket
- Flanged feet
- Hand powered crank
- 10 year hemi warranty (see warranty statement for full details)
Options
- 380 VAC, 3 phase, 50/60 Hz.
- 415 VAC, 3 phase, 50/60 Hz.
- 480 VAC, 3 phase, 50/60 Hz.
- 600 VAC, 3 phase, 50/60 Hz.
- 24 kW on 40, 60 gallon
- 33 kW on 30, 60 gallon
- Spring assist hinged stainless steel cover (CH-)
- Etched gallon markings (GM-)
- Etched litre markings (LM-).
- Correctional Options Available
- Solid State Thermostat
- 2” (50 mm) draw-off valve (TVT-2)
- 3” (76 mm) draw-off valve (TVT-3)
- Single pantry faucet with an 18” swing spout (SF-18).
- Double pantry faucet with an 18” swing spout (DF-18).
- Single pantry faucet with 18” swing spout and 68” spray hose and bracket (SP-RSH-18)
- Double pantry faucet with 18” swing spout and 68” spray hose and bracket (DP-RSH-18)
- One piece lift off stainless steel cover (C-).
- Triple basket assembly.
- Perforated strainer for draw off (TPS-).
- Solid disc for draw off (TSS-).
- Contoured measuring strip.
- Strainer hook (SH-)
- Pan support (PC-4).
- Pour lip strainer (TKS-).
- Draw-off valve hose kit (DVHK-).
- Calibrated thermostat dial, “F”
- Calibrated thermostat dial, “C”
- Kettle heat shield (KHS-)